High Temperature Thermocouple Probes for Extreme Temperatures : Quote, RFQ, Price and Buy
Need more information?
Let us help you with your inquiries, brochures and pricing requirements
The OMEGA® Exotic Thermocouple Probes are built for use in extreme temperatures - up to 2315 °C (4200 °F). These probes utilize either tungsten/rhenium (types G, C, or D) or platinum/rhodium (types R, S, or B) elements, with various insulations and sheath materials.
Based on the sheath material chosen, these probes may be used in oxidizing, inert, reducing, or vacuum conditions. The highest temperature is based on the lowest maximum temperature of the element, sheath, and insulation material.
Five cold end probe terminations are available – subminiature or standard size ceramic connector, replacement probe, molybdenum-sheathed nylon connector, heavy-duty standard size, or transition joint with two-meter long lead wire.
Sheath Materials
*Refractory metals are highly sensitive to any trace of oxygen above roughly 260 °C (500 °F). Should be used in vacuum or in very pure inert gases such as argon or helium.
Insulation Materials
Note:
For temperatures over 1000 °C (1800 °F), all insulating materials undergo a considerable decrease in resistivity with increasing temperatures.
** Values provided are for compacted insulation. For uncompacted hard-fired insulators, practical temperature range can be 40 to 90 °C (100 to 200 °F) higher.
It is advised not to use molybdenum sheathed probes in applications where they might come into contact with carbon, including graphite.
Termination Style Q
Type OGP heavy-duty, color-coded male and female connectors.
Termination Style HX
Type NHX high temperature ceramic male and female connectors with color identification dot.
Termination Style RP
Replacement probe style with 25 mm long bare wire leads.
Termination Style SX
Type SHX tiny high temperature ceramic male and female connectors with color identification dot.
Termination Style TJ
Heavy-duty transition termination with 2-meter long leads.
* Specify Termination Style: Q, TJ, HX, SX, or RP** Specify Probe Length in inches
Note 1: Prices subject to change; Please consult the Sales - Department for current pricing.
Note 2: Atmospheres: O-Oxidizing; I-Inert; V-Vacuum; R-Reducing.
Note 3: Maximum service temperatures shown are for probes with the largest available gauge wire leads. Consult engineering for ratings of other dimension probes.
Note 4: Bending: XPA and XIN sheathed probes with platinum elements be bent in the field.
Note 5: Some probes available in dual configurations. Check with sales department.
8-Channel Oven Data Logger for Oven Temperature Profiling
Achieving High Accuracy with the Turbine Flow Meter Stainless Steel Flange Mount
DC-1200 Colorimeter from OMEGA Engineering, Inc.
Dual Laser Infrared Thermometer for Industrial Measurement
Handheld Ultrasonic Flow Meter to Measure the Fluid Velocity of Liquid in a Full/Closed Pipe
HFS-3 Thin Film Heat Flux Sensor from Omega Engineering, Inc.
High Temperature and Humidity Transmitter with Remote Probe to Measure Temperatures from -40 to +180 °C
Measuring Conductivity, Resistivity and Salinity with the Multi- Parameter Input Transmitter
Measuring Temperature and Humidity with the Multi-Use PDF Data Logger
Measuring Temperature Targets and Metals with Miniature Infrared Temperature Sensor
Measuring the Surface Temperature of Solids and Liquids with USB Non-Contact Temperature Sensor
Measuring Voltage with the 8 or 16 Channel Universal Input Touch Screen Data Loggers
The Coriolis Mass Flow Meter for Measuring Mass Flow Rate and Temperature
The FDT- 30T Series Transit-Time Ultrasonic Flow Meter
Thermocouples with Ceramic Fiber Insulation with Inconel Overbraid to Measure Temperatures up to 1090 °C
Using the Pt 100 & Thermocouple for Air Steam, Laboratory and Industrial Applications
Viewing Barometric Pressure, Temperature and Humidity with the iServer MicroServer